Cemfloor Liquid Screed Installers in Wales

We are authorised installers of Cemfloor cement-based liquid screed across Wales. Cemfloor requires no sanding before tiling and can typically be tiled in 6 days without underfloor heating or around 21 days with UFH installed, depending on site conditions.

Domestic use of Cemfloor liquid screed in Wales

Cemfloor provides an ideal solution for the domestic floor market. Its flowing properties allow for fast, accurate installation while remaining a cement-based screed, avoiding the concerns associated with gypsum-based flowing screeds.

No special surface preparation is required prior to applying adhesives or floor finishes, and as an added benefit Cemfloor dries relatively quickly when compared to other flowing or traditional screed materials.

Although Cemfloor has only been available in the UK for a short time, it has been used successfully throughout Ireland and mainland Europe for several years and is already attracting significant demand due to its consistently high quality.

Cemfloor compared to alternative screed systems

Traditional sand / cement screed (including modified versions)
Calcium sulphate (gypsum) flowing screeds
Cemfloor cement-based liquid screed

Cemfloor combines the benefits of flowing screeds with the reassurance and versatility of a cement-based system.

Key Benefits of Cemfloor Liquid Screed

Thinner screed sections

Reduced thickness compared to traditional screeds, saving headroom and materials.

Minimal drying shrinkage

Less than 0.1% shrinkage, significantly reducing curling and cracking.

Larger bay sizes

Up to 150m² can be installed without movement joints.

Early access

Foot traffic is typically possible within 24–48 hours.

Exceptional thermal conductivity

Up to 2.9 W/m·K, making Cemfloor ideal for underfloor heating.

Suitable for wet areas

Unlike gypsum-based screeds, Cemfloor can be used in wet environments.

Reduced drying times

Typically 14–28 days depending on site conditions and floor coverings.

Self-compacting

No voids around underfloor heating pipes.

No surface laitance

No sanding required after curing.

EN 13813 compliant

Manufactured and installed in accordance with European standards.

Suitable for polishing

Decorative and functional polished screed finishes are possible.

Wide range of floor finishes

Compatible with tiles, hardwood floors, laminates and more.

0% VAT

ON NEW BUILDS

Contact Geoff Farmer Liquid Screeding Wales today for a quotation: 01559 370714 / 07786 614562

Cemfloor Brochures & Technical Data Sheets

Download official Cemfloor technical documentation, installation guidance and best-practice procedures.

View full Cemfloor brochure library

Cold Weather Guidelines Installation guidance for low temperature conditions

Warm Weather Guidelines Best practice for summer installations

On-Site Procedures Approved handling and installation processes

Installation of Cemfloor Step-by-step technical installation guide

Underfloor Heating Guidelines Specification and best practice with UFH systems

Drying Guidelines Drying times and moisture control guidance

If you would like to discuss Cemfloor liquid screed for your project, call today and speak directly to an experienced installer.